System
Exercise and Positioning
Q:What should I do if watch altitude shows several kilometers, tens of thousands of meters, obviously inconsistent with actual location?
A:[Cause/Principle]

Watch altitude usually combines air pressure sensor data for calculation. If air pressure data is obviously abnormal, calculated altitude will also be wrong. Therefore, when values like several kilometers or tens of thousands of meters that obviously do not match the actual environment appear, first check whether air pressure data is normal.

[Normal Range]

Weather, temperature, and environmental air pressure changes may indeed cause certain altitude fluctuations, such as dozens of meters difference at the same location at different times, which is normal.

But if a person is in an ordinary city or flat environment, and the watch shows several kilometers or even tens of thousands of meters, it is not normal air pressure fluctuation.

[Standard Test/Troubleshooting]

1) Check current air pressure in outdoor or ordinary indoor environment;
2) Confirm whether air pressure value is within normal atmospheric pressure range;
3) Manually calibrate actual altitude once;
4) After calibration, wait 5-10 minutes, then check air pressure and altitude;
5) Restart watch and test again;
6) Check whether there is obvious dirt, blockage, or water ingress near the air pressure sensor hole.

[Abnormal Determination]

If air pressure persistently shows values like a few hPa, ten-odd hPa, which are obviously unreasonable, and altitude shows several kilometers or tens of thousands of meters at the same time, even after manual calibration, it can be directly handled as air pressure sensor/hardware abnormality.
58
0
Sorry, we couldn't find what you were looking for.
We suggest trying different keywords in your search!