System
Exercise and Positioning
Q:Why are geo-fence alerts delayed or occasionally false?
A:[Cause/Principle] The geo-fence is not real-time radar; it must wait for the watch to complete positioning and upload, then determine whether a boundary was crossed. So the positioning interval, network delay, and positioning error all affect alert timing.

[Normal Range] Normal mode updates about every 10 minutes and Power-Saving mode about every hour, so some delay in fence alerts is normal; indoor base-station positioning may also cause false alerts.

[Standard Test/Troubleshooting] 1) Don't make the fence too small, and don't place boundaries right along frequently traveled routes; 2) Test in Normal mode; 3) Enter/exit the fence outdoors in a GPS-friendly area whenever possible; 4) Confirm the watch is online; 5) Test 2–3 times consecutively.

[Abnormal Determination] If, in Normal mode with stable GPS and network and a reasonably sized fence, multiple complete crossings produce no alert, or false alerts recur despite no boundary crossing, treat it as a fence/positioning-service abnormality.
60
0
Sorry, we couldn't find what you were looking for.
We suggest trying different keywords in your search!