Q:After installing the SIM card, mobile data doesn't work / there is no network after powering on. What could be the problem?
A:[Cause/Principle] After powering on, the watch must first recognize the SIM card and register with the local carrier network before 4G mobile data can be used. Common causes of having no network at all include: SIM card not recognized, SIM not activated or out of balance, SIM PIN lock enabled, incompatible local carrier frequency bands, no coverage at the location, or the carrier restricting children's watches/IoT devices.
If the watch has signal bars but cannot access the internet, it is more commonly caused by no data plan, incorrect APN, or abnormal mobile-data settings.
[Normal Range] After powering on or inserting a new SIM, searching and registering may take tens of seconds to a few minutes. Underground garages, deep indoor areas, or weak-coverage zones may also temporarily have no network.
[Standard Test/Troubleshooting] First insert the SIM into a phone and confirm it can make calls, receive SMS, and use mobile data normally; also confirm the SIM PIN lock is disabled; power off and reinsert the Nano SIM, confirming correct orientation; move the watch outdoors or to a location with good signal, power on, and wait 2–5 minutes; check whether carrier signal and the 4G icon appear; if there is signal but no 4G data, check the APN settings; confirm the local carrier bands are compatible with the watch. The EMEA version's 4G supports B1/B2/B3/B5/B7/B8/B20; cross-test with another SIM that is confirmed working, preferably from a different carrier.
[Abnormal Determination] If multiple SIMs that are confirmed working and band-compatible still cannot be recognized or register to the network at the same well-covered location, the watch's SIM slot, antenna, or cellular communication module is more likely to be abnormal.